Brazed plate heat exchanger NL95
Plate material: AISI 316L/ AISI 304 Stainless
Connection material: 304 Stainless
Brazing material: Nickel
Pressure: 3 or 4.5 Mpa
Standard design
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids
Between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure
Plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs
The fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids,
Pressure drop and temperature program.
The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the
Pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column.
Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame
And pressure plates.
Certified by ISO9001, CE, WRAS, UL, RoHS, CCS etc. A.
Width |
Height |
Horizontal
port
distance |
Vertical
port
distance |
Thickness |
Max Plates |
Max flowrate
(M3/h) |
Weight (kg) |
Heat exchange
area (m2) |
Volume L |
191 |
616 |
92 |
519 |
11+2.35N |
200 |
42 |
7.0+0.36N |
0.095 (N-2) |
0.0105 (N-2) |