Equal SWEP B5 High Heat Transfer Efficiency Copper Brazed Plate Heat Exchanger as Diesel Engine Heat Exchanger BL14 series
The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled.
The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel
Plates are corrugated to improve heat transfer efficiency and to make them rigid.
Cover plates: Stainless steel AISI 316
Connections: Stainless steel AISI 316
Plates: Stainless steel AISI 316
Brazing material: Copper
ISO9001, CE, UL, WRAS, RoHS, CCS certified
Particulars required for quotation
To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:
- Flow rates or heat load required
- Physical properties of liquids in question (if not water)
- Desired working pressure
- Maximum permitted pressure drop
Advantages of brazed plate heat exchangers in Industry and HVAC&R
The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial
And HVAC&R applications.
The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space
The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e. G. In district
The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very
Short delivery time.
Short delivery time.
Know-how design and customer support
|Type||Width||Length||Horizon hole||Vertical Hole||Height||Weight|
|Max pressure (Mpa)||3|
|Test pressure (Mpa)||4.5|
|Volum pr channel (L)||0.01(N-2)|
|Exchange area (M2)||0.014(N-2)|