Gasket Plate Heat Exchanger Standard Design
Gasket plate heat exchanger, also called plate and frame plate heat exchanger, consists of a pack of corrugated metal plates, The corrugation of the plates provides the passage between the plates, the two fluids transfer the heat between the channels. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The gasket between the plates seals the inter plate channel and directs the fluids into alternate channels. The number of plates is determined by the design: The temperature program, flow rate, pressure drop and physical properties of the fluids, . The plate corrugations promote fluid turbulence and the plate contact point support the plates against pressure. The frame plate and the pressure plate are fixed to a support column. Connections are located in the frame plate or pressure plates, this depends on the flow pass.
Advantages of the Baode Gasket Plate Heat Exchanger
*Less splace & more efficient
Baode Gasket Plate Heat Exchanger is compact size! With the compact designs they just need 22-50% less space in the system than a comparable shell-and-tube heat exchanger. So they require up to 75% less cooling media, you just need a smaller pumps that will consume less energy.
*Six times more efficient than shell & tube heat exchanger.
Compare with Shell-tube-heat exchanger, Baode gasket plate heat exchanger / Frame and plate heat exchanger offers up to six times greater heat transfer efficiency. The special corrugate plate pattern creates a high level of turbulence which, in combination with the low liquid volume and high heat transfer values. This make easy to control the heating or cooling effcient.
When cleaning is needed, gasket plate heat exchanger can easily be opened, giving access to the plate surfaces, use pressure water or certain liquid to clean.
Short delivery time.
Know-how design and customer support
Certified by ISO9001, CE, UL, WRAS, ROHS, CCS, etc.
|Height, H [mm] ||480|
|Width, W [mm] ||180|
|Min standard length, L [mm] ||400|
|Max standard length, L [mm] ||650|
|Vertical port distance, VC [mm] ||357|
|Horizontal port distance, HC [mm] ||60|
|Max temperature [° C] ||180|
|Max pressure [bar] ||10|
|Flange size ||Pipe 1 1/4"|
|Max. flow rate [kg/s] ||4|
|Cross reference of ALFA LAVAL||M3|
|Material||Applicable Temp||Applicable fluids|
|NBR|| -15C to +135C||Water, sea water, Mineral oil, salinous water|
|EPDM|| -25C to +180C||Hot water, Steam, Acid, Alkali|
|F26|| -55C to +230C||Acid, Alkali|
|FTP|| 0C to +160C||High Concentrated acid, Alkali, High temperature oil, Steam|