Gasket Plate Heat Exchanger for Swimming Pool Equipment

• Certification: CE, ISO, UL
• Application: Heater
• Principle: Mixing Heat Exchanger
• Style: Plate
• Water Heat Exchanger Type: Gasketed Phe
• Main Application: Water to Water Heat Exchanging
• Model NO.: BH Series
• Plate Material: Stainless Steel AISI 316L/304
• Max.Pressure: 16bar
• Gasket: NBR/EPDM/Viton
• Type: Stainless Steel Heating Equipment
• Structure Material: Metal Material
• Heat Transfer Surface: Plate Heat Exchanger
• Ceramic Heating Equipment Type: Stainless Steel Heater
• Recuperative Heat Exchanger Type: Plate Heat Exchanger
• Transport Package: Standard Plywood Box
• Specification: ISO9001, CE, UL, WRAS, rohs and etc.
• Trademark: Baode
• Origin: China
• HS Code: 8419500090
• Production Capacity: 1000 PCS/Month

Product Description

Working principle
Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is reated for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.
STANDARD MATERIALS
Frame plate: Mild steel Epoxy painted
Nozzles: Carbon steel
Metal lined: Stainless steel, Titanium
Plates: Stainless steel Alloy 316 or Titanium
A great advance on conventional PHEs
Optimized plate design
The SH Series solves two main problems that occur when conventional plate heat exchangers (PHEs) are used as steam heaters. The first is that when water is heated over a relatively wide temperature difference, e. G. From 10 to 70° C (50 to 158° F), the high steam velocity causes erosion and noise problems. The second is that when high water flow rates are used when heating water only a few degrees, the PHE has to be oversized to keep the secondary side (water) pressure drop within reasonable limits. Both of these drawbacks are now eliminated in the new BS Series of PHEs by a unique plate geometry that allows problem-free heating over narrow and wide temperature ranges.
Way ahead of shell-and-tubes
No thermal fatigue Cyclic heating and cooling produces thermal fatigue in rigid steam heaters like straight shell-and-tubes. This often results in cracked and worn components that demand maintenance and repair, thereby causing unwanted system downtime. The combination of thin plates and flexible gaskets in the BS Series prevents thermal fatigue by allowing the units to expand and contract in response to temperature changes. Fine temperature control Rapid heat transfer resulting from the small hold-up volume and high surface/volume ratio of the plates enables a fast response to temperature control.

Application:
Manufacturing
Chemical processing
HVAC
Marine
Food and drink
Pharmaceutical

Material of Plate		Suited Liquid Kinds
Stainless Steel (SUS304.316 Etc)		Pure Water, Normal Water, Oil for heating, Mineral Oil
Ti, Ti-pd		Sea Water, Saline Water, Mineral Water
20Cr, 18Ni, 6Mo (254SMO)		Dilute Sulphuric Acid, Organic Water Solution
Ni		High-temp and concentration caustic soda
Hastelloy (C276, D205, B2G)		Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Material of Gasket	Operating Temperature ° C		Suited Liquid Kinds
NBR	-15~+135° C		Water, Sea Water, Mineral Oil, Salty Water
EPDM	-25~+180° C		Hot Water, Steam, Acid, Caustic
F26	-55~+230° C		Acid, Caustic, Fluid
TPF	0~+160° C		Concentrated Acid, Caustic, High-temperature Oil, Steam

 

Model	BH200H
Cross Reference	M20M, T20M, T20B
Height,  H [mm]	2150
Width,  W [mm]	750
Min standard length,  L [mm]	1250
Max standard length,  L [mm]	3350
Vertical port distance,  VC [mm]	1478
Horizontal port distance,  HC [mm]	353
Max temperature	180
Max pressure [barg]	10/16
Flange size	DN200/8"
Max. flow rate [kg/s]	225