Low Operating Costs Copper Brazed Plate Heat Exchanger for Solar Water Heating System Bl26c Series

• Certification: CE, ISO, UL
• Application: Heater
• Principle: Mixing Heat Exchanger
• Material: Copper
• Heat Exchanger Type: Copper Brazed Plate Type
• Main Application: Solar Water Heating System
• Model NO.: BL26C Series
• Plate Material: Stainless Steel AISI316/304
• Structure Material: Metal Material
• Heat Transfer Surface: Plate Heat Exchanger
• Transport Package: Standard Plywood Box
• Specification: ISO9001, CE, UL, WRAS, ROHS and etc.
• Trademark: Baode
• Origin: China
• HS Code: 8419500090
• Production Capacity: 1000 PCS/Month

Product Description

Working principles
The heating surface of water heat exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled.

Standard design
The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer efficiency and to make them rigid.
Standard materials
Cover plates: Stainless steel AISI 316
Connections: Stainless steel AISI 316
Plates: Stainless steel AISI 316
Brazing material: Copper
Particulars required for quotation
To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:
Flow rates or heat load required
Temperature program
Physical properties of liquids in question
Desired working pressure
Maximum permitted pressure drop
Advantages of brazed plate heat exchangers in Industry and HVAC&R
The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and HVAC&R applications.
The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places where space is limited.
The unit has no gaskets and is therefore suitable in applications where temperature and/or pressure is high e. G. In district heating.
The Baode supply system reassures that, no matter where you are on the globe, the BHE units are available with a very short delivery time.

Application:
Refrigeration Systems:
Evaporator,
Condenser,
Economizers and Desuperheaters
Air dryer
Heat pump
Absorption chiller
HVAC
Radiant Floor,
Snow Melt,
Boiler and
Solar water heat exchanger
District heating
Other Industrial applications such as:
Heat Recovery and
Oil Cooler: Hydraulic oil cooling, engine oil cooling, and fuel oil heating.
Steam Heating.
Flat plate heat exchanger
Beer wort cooler
Milk pasteurization
Wind turbine oil cooler
Marine oil cooler

Model	BL14	BL20	BL26	BL26C	BL50	BL95
Width, A [mm]	78	76	111	124	111	191
Height, B [mm]	206	310	310	304	525	616
Length, E [mm]	9+2.3n	9+2.3n	10+2.36n	13+2.4n	10+2.35n	11+2.35n
Horizontal port distance, C [mm]	42	42	50	70	50	92
Vertical port distance, D [mm]	172	282	250	250	466	519
Max pressure [Mpa]	3	3	3	3/4.5	3/4.5	3/4.5
Max flowrate [M3/h]	3.6	3.6	8.1	8.1	12.7	39
Weight [kg]	0.6+0.06n	1.0+0.08n	1.3+0.12n	2.2+0.16n	2.6+0.19n	7.8+0.36n

Model	BL120	BL190	BL200	BL1400	BL100  *	BL200  *
Width, A [mm]	246	307	321	429	248	322
Height, B [mm]	528	696	738	1398	495	739
Length, E [mm]	13+2.36n	13+2.75n	13+2.7n	22+2.78n	10+2.15n	13+2.55n
Horizontal port distance, C [mm]	174	179	188	220	157	205.2
Vertical port distance, D [mm]	456	567	603	1190	405	631
Max pressure [Mpa]	3	3	2.1	1.5	3/4.5	3/4.5
Max flowrate [M3/h]	42	100	100	300	42	100
Weight [kg]	7.2+0.52n	12.5+0.72n	13+0.75n	31.8+1.73n	6.5+0.37n	13+0.78n